Forgus 35 Sailboats for Sale

Hugo Samuelsson·1977 – 1983·~28 hulls·Forgus Yachts
Forgus 35 drawingBuilder drawing
Hull Type
Monohull · fin
Rig
Masthead Sloop
LOA
34.12' · 10.4 m
Disp.
12,787 lbs · 5,800 kg
First year
1977

The Forgus 35 is a mastheadsloop monohull designed by Hugo Samuelsson and built by Forgus Yachts from 1977 through 1983. Twentyeight hulls were completed. Just over 34 feet on deck, she has a lead fin keel and a skeghung rudder. Her numbers describe a moderatedisplacement late1970s cruiser rather than a boat with racing ambitions.

Market snapshot

Median asking · 12 mo
—
Asking price
Recent listings · 90 d
—
Listed for sale
3-month price trend
—
Not enough data yet
Countries with listings
—
Global market

Recent Listings

1 for sale · showing 10 newest

Forgus 35 Buyer's Guide

Shopping the used Forgus 35 means looking at a small, late-seventies cruiser with only twenty-eight hulls ever completed. She is a solid-fiberglass masthead sloop with a lead fin keel, and the brokerage pool is thin enough that each example deserves careful individual inspection rather than comparison against a busy market.

Layouts on the Used Market

Owner three-cabin layouts are the more common on the used market, but both are available; ex-charter examples are common. The standard arrangement gives three cabins with a galley and toilet facility, so most buyers will be choosing between a privately maintained boat and a former charter unit that may show harder wear in the saloon and systems.

Equipment and Common Upgrades

On the used market the Forgus 35 commonly carries hot water, AIS, and a life raft as fitted equipment. Beyond those, the inboard Volvo Penta MD11 diesel is the typical power plant, and a buyer should treat the engine and its cooling as the first systems question on any viewed hull.

What to Inspect

At a viewing, measure the loaded draft against the 1.80–1.90 meter fin keel span anchor — a hull resting on her keel in a too-shallow berth will show gelcoat crazing or stub damage at the fin root. With only twenty-eight built and solid fiberglass construction, look hard at the original rigging: the genoa and jib sheets are half-inch diameter and the mainsheet is 85.3 feet long anchor, and worn or sun-cut sheets may need full replacement. Inspect the lead fin keel union to the solid hull for any separation or rust staining, since bedding failure is a real risk on an older hull even if not documented as a class-wide defect.

Availability and Buyer's Takeaway

The typical market for these boats is Sweden. Before you commit, run this short list:

  • Confirm the berth depth against the 5.91–6.21 ft draft
  • Inspect the fin-keel hull joint for staining or movement
  • Check the half-inch sheet runs for UV and chafe damage
  • Verify the Volvo Penta MD11 starts and cools cleanly
  • Confirm hot water, AIS, and life raft are present and serviced

Comparable models

Similar length, displacement, and era. Open a row to compare that model's market page.

Similar boats to compare

6 similar designs
ModelLOAMedian askListings · 12 moActive · 90 d
Hallberg-Rassy Rasmus 3534.5'$ 36,6074411
Comfortina 3535.83'$ 109,1552710
Dufour 3535.25'$ 31,044233
Nauticat 3534.92'$ 104,818173
Hinterhoeller Niagara 3535'$ 20,000132
Scanmar 3535.1'$ 38,000104

Frequently asked questions

01What should I look at instead of a Forgus 35?+
Comparable models include Hallberg-Rassy Rasmus 35, Comfortina 35, Dufour 35. Use the comparison table above to check pricing and availability.