Snapdragon 24 Buyer's Guide
Shopping the used Snapdragon 24 means looking at a 1962-origin British pocket cruiser built by Thames Marine with solid fiberglass hull and deck. She was offered with more than one keel and engine configuration, so the brokerage example you inspect may differ substantially from the next one alongside it — and the right choice depends on where you intend to sail her.
Layouts on the Used Market
The Snapdragon 24 was produced with different keel alternatives: a fin-keel version drawing about 3.6 to 3.9 feet, and a bilge-keel version at roughly 2.5 to 2.8 feet depending on load. The bilge keel is the one to seek for drying moorings or shallow creeks; the fin keel will point higher and track better under way. Below, every example carries one cabin with five berths plus a galley and toilet, finished in teak — a consistent plan regardless of keel, though engine bay access and specific hardware will vary with the fitted powerplant.
Equipment and Common Upgrades
Solar is commonly fitted to used Snapdragon 24s, reflecting the modest house loads of a teak interior with manual systems. Beyond that, the most consequential buyer items are the engine and drivetrain: the Yanmar 1GM10 and Nanni 260HE were both used, each with shaft drive, and the Nanni's higher calculated speed of about 6.6 knots versus the Yanmar's 5.1 is worth confirming at survey. Rigging is uniform — 10 mm sheets throughout, with genoa and jib sheets at 7.3 m and mainsheet at 18.4 m — so a used boat's sail-handling story is mostly about wear, not configuration.
What to Inspect
The Snapdragon 24 was built with different keel alternatives, so confirm which keel is fitted and inspect its attachment to the solid glass hull built with different keel alternatives. The hull and deck are fiberglass and should be checked for laminate soundness rather than cored-deck issues in the hull itself. With several engine options and shaft-drive transmission on both the Yanmar 1GM10 and Nanni 260HE, verify the specific installation and its mounts equipped with different engine alternatives. The teak interior should be assessed for moisture and fastening, as it is the one perishable surface in an otherwise glass boat.
Availability and Buyer's Takeaway
Used Snapdragon 24s are typically found in the United Kingdom. For a buyer, the short list is:
- Decide fin vs bilge keel for your waters
- Confirm exact engine model and shaft-drive condition
- Check solid glass hull and deck for soundness
- Inspect teak interior for rot and fastenings
- Verify solar fitment and battery state
Price & volume trends
Monthly asking-price and listing-volume trends for the Snapdragon 24. The line shows the median ask each month; the bars show how many listings appeared.
Monthly breakdown · 5 rows
| Month | Listings | Median ask | Δ vs. last mo. |
|---|---|---|---|
| Oct 25 | 1 | $3,734 | — |
| Feb 26 | 1 | $1,358 | -63.6% |
| Mar 26 | 1 | $4,073 | +199.9% |
| Apr 26 | 1 | $2,580 | -36.7% |
| Jun 26 | 1 | $4,752 | +84.2% |
Where they're listed
Snapdragon 24 listings appear across 1 country. United Kingdom has the most listings with 5.
Country view
5 listings · 1 country| Country | Median ask | Listings · 12 mo | Active · 90 d | Share |
|---|---|---|---|---|
| United Kingdom | $3,734 | 5 | 1 | 100.0% |