North Coast 30 — Information, Review, Specs

Richard Carlson·1969 – 1970·~5 hulls·North Coast Marine & Engineering Ltd.
North Coast 30 drawingBuilder drawing
Hull type
Monohull · fin
Rig
Masthead Sloop
LOA
30.25' · 9.22 m
Displ.
7,900 lbs · 3,583 kg
First year
1969

thought I will search for the "North Coast 30" sailboat to identify its manufacturer, designer, and general specifications. Then, I will look for editorial reviews from highauthority sources like Sail Magazine, Yachting Monthly, or Cruisers World, as well as manufacturer brochures and owner association pages. I will also investigate the boat's sailing performance, interior layout (if it's not a dinghy), sibling models or variants, common technical issues, and any media or community presence. Finally, I will write a comprehensive, objective guide for the North Coast 30 following the specified structure and citation protocols.

Measurements

Dimensions 01

LOA
30.25 ft
LWL
22.83 ft
Beam
9 ft
Draft
5.16 ft
Max headroom
-
Air draft
-

Construction & hull 02

Construction
Fiberglass
Hull type
Monohull
Keel type
Fin
Rudder
1× Skeg-Hung
Ballast
3050 lbs
Displacement
7900 lbs
Water
-
Fuel
-

Rig & sails 03

Rig type
Masthead Sloop
P · main luff
-
E · main foot
-
I · fore ht.
-
J · fore base
-
Forestay (est)
-
Sail area
450 sqft

Calculations 04

SA/D ratio
18.15
Ballast/Disp.
38.61
D/L ratio
296.39
Comfort ratio
26.1
Capsize screening
1.81
Hull speed
6.4 kn

Similar sailboats

12 comparable designs · similar LOA, displacement & rig