Fuji 32 Sailboats for Sale

Clair Oberly·1976·Fuji Yacht Builders Ltd.
Fuji 32 drawingBuilder drawing
Hull Type
Monohull · long
Rig
Ketch
LOA
31.5' · 9.6 m
Disp.
13,115 lbs · 5,949 kg
First year
1976

The Fuji 32 is a 31foot6inch ketch built by Fuji Yachts, a yard that originated in Yokosuka, Japan. Designed by Clair Oberly and launched in 1976, she carries a solid fiberglass hull and deck, an iron ballast of 4,635 pounds, and a displacement of 13,115 pounds on a 24foot9inch waterline. With a beam of just under 10 feet and a long shoal keel drawing 3 feet 8 inches, she reads as a husky, purposeful cruiser rather than a racer — and the numbers bear that out.

Market snapshot

Median asking · 12 mo
$64,820
Asking price · 2 listings
Recent listings · 90 d
0
2 tracked · 12 mo
3-month price trend
Not enough data yet
Countries with listings
Global market

Recent Listings

1 for sale · showing 10 newest

Fuji 32 Buyer's Guide

Shopping the used Fuji 32 means looking at a 1976-onward Clair Oberly ketch from Fuji Yachts, a solid-fiberglass 31-foot-6-inch cruiser with a long shoal keel. She is a heavy, steady boat with a complete original documentation set, which matters more than usual when you are evaluating a decades-old listing. The known points below come from the design record and reviewer notes; the rest is what you are likely to find fitted.

Layouts on the Used Market

Expect the standard Fuji 32 interior as drawn in the builder's plan set. The boat's 13,115-pound displacement and 4,635-pound iron ballast sit under a solid fiberglass deck, and her holding tank, bilge, fresh water, and diesel piping runs all follow the original system plans — a real advantage when tracing a mystery hose or pump on a viewing.

Equipment and Common Upgrades

Used Fuji 32s commonly carry a heating system, solar panels, lithium batteries, a bimini, AIS, a chartplotter, a life raft, and circumnavigation-grade rigging. For a buyer, the power-and-energy cluster — solar with lithium banks and cabin heat — determines whether she is ready for extended anchoring or still needs a rewire. The navigation cluster of AIS and chartplotter, plus the canvas of a bimini, speaks to how much offshore or liveaboard use the prior owner invested in; a life raft and serious rigging imply the same and deserve a close look at certification dates.

What to Inspect

The one design caveat on the used boat is the shoal-draft hull's ballast margin. A reviewer suggested that because of the shallow keel, adding a bit more ballast would be worth considering if an ocean voyage was planned. On a specific hull, check whether any prior owner added ballast or modified the keel, and confirm the iron ballast's condition for corrosion at the hull joint. A boat presented as ocean-ready without that discussion deserves a surveyor's note on ballast-and-draft suitability before you commit.

Availability and Buyer's Takeaway

Before you sign:

  • Verify the original system plans match the installed plumbing and wiring
  • Confirm iron ballast shows no active corrosion at the hull seam
  • Test the heating, solar, and lithium systems under load
  • Check life raft and circumnavigation rigging for current certification
  • Assess shoal-keel ballast margin against your offshore intentions

Comparable models

Similar length, displacement, and era. Open a row to compare that model's market page.

Similar boats to compare

3 similar designs
ModelLOAMedian askListings · 12 moActive · 90 d
Island Packet 3235'$ 64,900403
Morgan Yachts 3231.92'$ 27,10970
Fuji 32You are here$ 64,82020

Frequently asked questions

01How much does a used Fuji 32 cost?+
The median asking price for a used Fuji 32 over the past 12 months is $64,820. Prices vary by condition, year, equipment, and location.
02How many Fuji 32 sailboats are for sale?+
2 have been tracked across the past 12 months.
03What should I look at instead of a Fuji 32?+
Comparable models include Island Packet 32, Morgan Yachts 32. Use the comparison table above to check pricing and availability.