ETAP 32I Sailboats for Sale

Layouts on the Used Market

The 32I was delivered in standard and performance trims. The standard layout uses a 4.60-foot keel with a 47.7-foot mast and 280-square-foot main; the performance variant sits on a 5.25-foot keel with a 50-foot mast and 301-square-foot main. Both share sleeping space for six in three cabins: a forward V-berth, a port aft double, and two saloon settees around a center table. The L-shaped galley to port by the companionway and the starboard head with shower define the belowdecks flow, finished in white oak veneer with stainless accents.

Equipment and Common Upgrades

Most 32I boats on the market carry an autopilot, chartplotter, and hot water as standard cruising kit. Buyers will often find cabin heating, an AIS transponder, a wind generator, and both symmetric and asymmetric spinnakers among the inventory, with bimini, cockpit shower, and swim platform frequent outdoor additions. For the serious cruiser, a wind generator and asymmetric spinnaker extend offshore and light-air capability, while heating and hot water make shoulder-season berthing far more comfortable.

What to Inspect

The double-skinned foam-cored hull provides insulation and renders the boat unsinkable. Because the core is closed-cell foam between fiberglass skins, a buyer should closely check hull-to-deck unions and any penetrating fittings for delamination or water ingress that would compromise the foam. Verify which version you are viewing by measuring mast height and keel draft, since the performance deeper keel affects grounding clearance and the taller rig changes tuning needs. Confirm the galley's three-burner stove, 17.2-gallon ice box, and pressurized sink, plus the head's marine toilet and shower, are intact and unmodified.

Availability and Buyer's Takeaway

ETAP 32I yachts typically appear in the Netherlands, Spain, France, the Philippines, and the United Kingdom. For a shopper, the checklist is straightforward: confirm standard versus performance keel and mast, inspect the foam-core hull joints for moisture, and verify the core galley and head equipment. Choose the shoal standard keel if you favor Mediterranean-style anchorages, or the performance version if taller rig and deeper keel suit your sailing.