Oceaan 25 Sailboats for Sale

E. G. van de Stadt/Cees van Tongeren·1977·K & S Polyboats
Approximate drawing

Hover a measurement to read its value

Hull Type
Monohull · fin
Rig
Fractional Sloop
LOA
24.84' · 7.57 m
Disp.
4,800 lbs · 2,177 kg
First year
1977

The Oceaan 25 is a small sailboat drawn by the Dutch maritime architect Ericus Gerhardus van de Stadt and produced from 1977 by K & S Polyboats. At just under 25 feet on the waterline length of 21.3 feet and a beam of 9.25 feet, she carries 4,800 pounds of displacement and an iron ballast, with a fin keel and skeghung rudder. Her proportions place her among the compact coastal cruisers of the late 1970s, and the published design data lets us read her as a deliberate smallboat exercise in van de Stadt's balanced, easily driven hull logic.

Market snapshot

Median asking · 12 mo
$9,907
Asking price · 1 listings
Recent listings · 90 d
1
1 tracked · 12 mo
3-month price trend
0.0%
vs. 12-mo median
Countries with listings
1
Italy (100.0%)

Recent Listings

1 for sale · showing 10 newest

Oceaan 25 Buyer's Guide

The Oceaan 25 is a 24.84-foot fractional-sloop cruiser designed by Ericus Gerhardus van de Stadt and built by K & S Polyboats from 1977. For a shopper scanning the used market, she is a small, light-displacement coastal boat with an iron-ballasted fin keel and skeg-hung rudder, whose documented personality is mostly about hull numbers and rig dimensions rather than factory-fitted luxuries.

Layouts on the Used Market

Buyers should expect to evaluate each individual boat on its own merits rather than against a standard published plan. The constant facts are the hull shell and rig: 21.3-foot waterline, 9.25-foot beam, 4,800-pound displacement, and a load-dependent draft of 4.92 to 5.22 feet. Any interior you find refitted or original is a variable the survey must capture.

Equipment and Common Upgrades

Jib and genoa sheets run 24.8 feet at 3/8 inch, a mainsheet at 62.1 feet and 3/8 inch, and a spinnaker sheet at 54.6 feet and 3/8 inch. A buyer should treat running rigging replacement as a baseline expectation rather than an upgrade, and judge any fitted sail-handling or navigation gear on the specific boat.

What to Inspect

The immersion rate is about 800 pounds per inch and the wetted-surface area is 226 square feet, since load-dependent draft means a heavily equipped boat will sit deeper than the 4.92-foot minimum draft varies with load from 4.92 to 5.22 feet. Confirm the actual floating draft against the advertised condition and watch for added tankage or ballast that shifts her trim.

Availability and Buyer's Takeaway

No regional market data was supplied for this model. For the buyer, the practical checklist is short:

  • Verify the draft under load before assuming marina access.
  • Inspect the solid fiberglass hull and deck for repair history.
  • Treat all sheet rigging as due for renewal unless freshly replaced.
  • Obtain a survey that captures the interior layout.

Where they're listed

Oceaan 25 listings appear across 1 country. Italy has the most listings with 1.

Median ask by country
USD
Share of listings
Count · past 12 months

Country view

1 listings · 1 country
CountryMedian askListings · 12 moActive · 90 dShare
Italy$9,90711100.0%

Frequently asked questions

01How much does a used Oceaan 25 cost?+
The median asking price for a used Oceaan 25 over the past 12 months is $9,907. Prices vary by condition, year, equipment, and location.
02How many Oceaan 25 sailboats are for sale?+
1 Oceaan 25 listing has gone live in the last 90 days, and 1 has been tracked across the past 12 months.
03Are Oceaan 25 prices going up or down?+
The median asking price for the Oceaan 25 has stayed steady over the last 3 months compared with the 12-month median.
04Where are Oceaan 25 sailboats for sale?+
The top markets for used Oceaan 25 listings over the past 12 months are Italy (100.0%).