Luders 24 Buyer's Guide
The Luders 24 is a 38-foot fractional sloop from the design board of Luders and built by Luders Marine Construction Co., with production beginning in 1935 and only fifteen hulls completed. For a buyer on the used market, this is a rare traditional-composite boat whose laminate wood construction sets it apart from both planked wooden classics and production fiberglass sloops of later decades.
Layouts on the Used Market
The Luders 24 measures 38 feet overall, 24 feet on the waterline, and 6 feet 3 inches in beam, with a fin keel and spade rudder drawing 4 feet 11 inches. No interior plan, berth count, or cabin section is standardized, so each boat must be evaluated as an individual. The narrow beam means below-deck volume is period-typical rather than expansive, and the laminate construction keeps a traditional wooden-yacht appearance rather than maximizing cabin space.
Equipment and Common Upgrades
Spinnakers and asymmetric spinnakers are commonly fitted on Luders 24 boats offered for sale, reflecting the class's sloop rig and the light-air reaching potential of a traditional hull form. A buyer should confirm the condition of any pole, turtle, and halyard runs associated with those sails, since downwind gear on a fifteen-boat class is often owner-sourced rather than factory-standard.
What to Inspect
The hull is built by a laminate wood construction method that produces a strong, stiff, and seamless shell laminate wood construction, with no structural defects itemized for the class. At a viewing, verify that the seamless shell remains intact: sound the hull across its full length with a mallet, watch for localized softness or discoloration at through-hull fittings and chainplate lands, and look for hull-to-deck joint separation that would betray moisture in the laminate. Because the boat retains a traditional wooden aesthetic, judge the visual finish for honest aging rather than assuming modern gelcoat standards. Confirm the fin keel and spade rudder show no grounding damage and that the 4-foot-11-inch draft appendage is fair and uncracked.
Availability and Buyer's Takeaway
The Luders 24 is typically found in the United States. For a shopper, the practical steps are few but specific:
- Sound the laminate hull for soft spots across its length.
- Check chainplate and through-hull bedding for stains or movement.
- Inspect the fin keel and spade rudder for grounding scars or cracks.
- Confirm spinnaker gear condition if downwind sails are fitted.
- Verify individual hull history rather than fleet norms.
Price & volume trends
Monthly asking-price and listing-volume trends for the Luders 24. The line shows the median ask each month; the bars show how many listings appeared.
Monthly breakdown · 3 rows
| Month | Listings | Median ask | Δ vs. last mo. |
|---|---|---|---|
| Sep 25 | 1 | $57,000 | — |
| Apr 26 | 3 | $49,500 | -13.2% |
| May 26 | 2 | $49,500 | 0.0% |
Where they're listed
Luders 24 listings appear across 1 country. United States has the most listings with 6.
Country view
6 listings · 1 country| Country | Median ask | Listings · 12 mo | Active · 90 d | Share |
|---|---|---|---|---|
| United States | $49,500 | 6 | 0 | 100.0% |