Endeavour 28 Sailboats for Sale

Reg Gardner/Endeavour Yachts·1974·Endeavour Yachts Pty. Ltd.
Endeavour 28 drawingBuilder drawing
Hull Type
Monohull · fin
Rig
Masthead Sloop
LOA
27.92' · 8.51 m
Disp.
7,015 lbs · 3,182 kg
First year
1974

The Endeavour 28 is a 27foot11inch masthead sloop drawn by maritime architect Reg Gardner together with Endeavour Yachts of Australia in the mid1970s. Production began in 1974. Its solidfiberglass construction, iron fin keel, and sixberth interior place it firmly in the smallfamilycruiser tradition of the decade, while its design ratios suggest a livelier character than its length might imply.

Market snapshot

Median asking · 12 mo
$348
Asking price · 1 listings
Recent listings · 90 d
0
1 tracked · 12 mo
3-month price trend
—
Not enough data yet
Countries with listings
1
Australia (100.0%)

Recent Listings

1 for sale · showing 10 newest

Endeavour 28 Buyer's Guide

The Endeavour 28 is a masthead-sloop cruiser from the board of Reg Gardner and the Australian builder Endeavour Yachts, dating to the mid-1970s with production from 1974. On the used market she appears as a solid-fiberglass 28-footer with an iron fin keel, a roomy hull, and a six-berth interior — a straightforward small cruiser for a buyer who values space and stability over a brisk turn of speed.

Layouts on the Used Market

Used Endeavour 28s share the same essential plan: six berths below with a galley and a toilet facility, made livable by a beam of 9 feet 4 inches that gives the cabin more volume than most peers of her length. The roomy hull means a buyer can expect a usable weekend interior rather than a cramped racer's cradle.

What to Inspect

The Endeavour 28 has a solid fiberglass hull and deck with an iron fin keel. On a specific boat, examine the iron fin keel for rust staining or active corrosion at the hull joint, since iron ballast exposed to moisture will bleed and can compromise the bond. The shaft-drive transmission paired with the Volvo Penta MD7A should be run under load to confirm smooth engagement and to check the stern gland for weeping. Because the hull immerses 768 pounds per inch, inspect the boot-top line and interior joinery for evidence that a previous owner overloaded her, which would show as strained locker floors or a permanently depressed waterline. Verify that the masthead rig's standing rigging and the 3/8-inch sheets are present and untired, and confirm the deck fiberglass shows no softness around through-deck fittings.

Availability and Buyer's Takeaway

  • Inspect the iron keel-hull junction for rust or separation
  • Run the Volvo Penta MD7A under load and check the shaft seal
  • Look for overload signs from the 768 lb/inch immersion rate
  • Confirm masthead rigging and 3/8-inch sheets are sound
  • Test deck laminate around through-fittings for softness

Where they're listed

Endeavour 28 listings appear across 1 country. Australia has the most listings with 1.

Median ask by country
USD
Share of listings
Count · past 12 months

Country view

1 listings · 1 country
CountryMedian askListings · 12 moActive · 90 dShare
Australia$34810100.0%

Comparable models

Similar length, displacement, and era. Open a row to compare that model's market page.

Similar boats to compare

2 similar designs
ModelLOAMedian askListings · 12 moActive · 90 d
Sabre 28-228.42'$ 14,5002115
Endeavour 28You are here—$ 34810

Frequently asked questions

01How much does a used Endeavour 28 cost?+
The median asking price for a used Endeavour 28 over the past 12 months is $348. Prices vary by condition, year, equipment, and location.
02How many Endeavour 28 sailboats are for sale?+
1 has been tracked across the past 12 months.
03Where are Endeavour 28 sailboats for sale?+
The top markets for used Endeavour 28 listings over the past 12 months are Australia (100.0%).
04What should I look at instead of a Endeavour 28?+
Comparable models include Sabre 28-2. Use the comparison table above to check pricing and availability.