Edel 6 Sailboats for Sale

Maurice Edel·1975 – 1984·~900 hulls·Construction Nautic Edel /Edel Canada
Edel 6 drawingBuilder drawing
Hull Type
Monohull · fin
Rig
Fractional Sloop
LOA
21.83' · 6.65 m
Disp.
3,484 lbs · 1,580 kg
First year
1975

The Edel 6 is a compact fractionalsloop sailboat drawn by French maritime architect Maurice Edel in the mid seventies and produced by the Canadian yard Construction Nautic Edel S.A. Known also as the Edel 660 or Edel 665, it sits at just under 22 feet overall with a waterline near 18 feet, and 900 examples left the molds before production ended in 1984. It is a small cruiser with a toilet and a mahogany interior, offered in several keel configurations to suit varied cruising grounds.

Market snapshot

Median asking · 12 mo
$5,185
Asking price · 2 listings
Recent listings · 90 d
0
2 tracked · 12 mo
3-month price trend
Not enough data yet
Countries with listings
1
Italy (100.0%)

Recent Listings

1 for sale · showing 10 newest

Edel 6 Buyer's Guide

The Edel 6, designed by Maurice Edel and built by Construction Nautic Edel S.A. through 1984, is a 21.83-foot fractional sloop that appears on the used market primarily in Italy. With 900 built and several keel configurations, it rewards shoppers who know which draft and rig details matter before they inspect a specific hull.

Layouts on the Used Market

Used Edel 6 boats turn up with one of three iron keels: a fin drawing about 3.3 to 3.6 feet, a wing keel near 4.3 to 4.6 feet, or a stub/centreboard that lowers to roughly 2 feet and raises for very shallow access. The mahogany interior includes a toilet, and the 8.2-foot beam keeps the cabin intimate. A buyer choosing between examples should weigh shallow-water plans against the deeper keels' likely tracking behavior, since the listing market offers no single standard layout.

Equipment and Common Upgrades

The one consistent setup across used Edel 6 boats is an outboard motor used for docking and maneuvering rather than an inboard. Given the boat's modest size, any added canvas, sail-handling, or navigation gear should be judged on condition, and a buyer should confirm the fractional rig's 3/8-inch sheets are intact.

What to Inspect

The construction is solid fiberglass on hull and deck, and all keel foils are iron, so check the iron keels for corrosion or coating loss where they meet the fiberglass. Because draft varies with load and the immersion rate is about 520 pounds per inch, inspect how each specific boat sits on her lines and whether the stub/centreboard pivot and trunk are sound. Verify the fractional rigging and sheet sizes, and confirm the outboard mounting and steering lead are serviceable.

Availability and Buyer's Takeaway

The Edel 6 is found on the used market in Italy. A short checklist for shoppers:

  • Confirm which of the three iron keels is fitted and its condition
  • Inspect fiberglass hull and deck for soundness
  • Verify outboard motor mount and maneuvering setup
  • Check mahogany interior for rot or hardware leaks
  • Match draft to intended cruising grounds

Where they're listed

Edel 6 listings appear across 1 country. Italy has the most listings with 2.

Median ask by country
USD
Share of listings
Count · past 12 months

Country view

2 listings · 1 country
CountryMedian askListings · 12 moActive · 90 dShare
Italy$5,18520100.0%

Frequently asked questions

01How much does a used Edel 6 cost?+
The median asking price for a used Edel 6 over the past 12 months is $5,185. Prices vary by condition, year, equipment, and location.
02How many Edel 6 sailboats are for sale?+
2 have been tracked across the past 12 months.
03Where are Edel 6 sailboats for sale?+
The top markets for used Edel 6 listings over the past 12 months are Italy (100.0%).