Malo 50 Information, Review, Specs

Boat drawing
Make
Malo
Model
50
Number Built
140
Production Year(s)
1969 - 1980

The search results provide a good amount of information. I can now start drafting the article.

Summary of findings from search:

  • Designer: Olle Enderlein (known for classic Swedish designs, feeling for lines and proportions). He designed early Malo models like the Arietta 31 (builder article) and also for Hallberg-Rassy.
  • Builder: Malö Yachts, from Orust, Sweden. Known for robust construction, comfort, blue-water cruising, safety, capability, meticulous attention to detail, and skilled craftsmanship, 3, 8, 10, 12]. They embraced fiberglass in 1969, 3].
  • Production: 1969-1980, with about 140 built.
  • Variations: Available with both sloop and ketch rigs.
  • Sailing Performance: Described as robust, seaworthy, and capable of different types of sailing from inshore to offshore. Owners report feeling safe and well-protected. Hull speed is 7.28 knots.
  • Interior: Described as having a spacious interior. While specific layouts are not easily found in the snippets for the 50, Malo generally emphasizes liveaboard comfort and a "haven" on the water. Some snippets mentioned alternative double aft cabins for other models (e.g., Malo 40), but this isn't confirmed for the 50 specifically from the search. One forum post mentions an access panel problem in the starboard aft cabin for a Malo, hinting at aft cabin layouts.
  • Owner's Perspectives: Owners praise them as "dream boats" and feel safe at sea. Common issues mentioned for other Malo models include leaks around stanchion bases. Active owner clubs exist, 14].

Now, I will combine these findings with the and the calculated ratios to construct the article.

Ratio interpretations:

  • SA/Disp: 13.64. This is a moderate to low ratio, suggesting the Malo 50 is not a light-air speedster. It implies a boat that will be comfortable and stable, prioritizing cruising capability over racing performance, and will likely appreciate a good breeze to get moving.
  • Ballast/Disp: 44.4%. This is a very high ratio, confirming excellent stiffness and stability, characteristic of a serious offshore cruiser designed to stand up to heavy weather.
  • Disp/LWL: 275.7. This indicates a medium-heavy displacement cruiser. It suggests a solid, sea-kindly motion rather than a light, responsive feel.

Let's begin writing.

InfoView listings

Measurements

Construction & Hull

Construction Material
Fiberglass (Solid)
Hull Type
Monohull Sailboat
Keel Type
Long
Rudder
1x —
Ballast
7055 lbs (Iron)
Displacement
15873 lbs
Water Capacity
86 gal
Fuel Capacity
53 gal

Engine

Engine Make
Volvo Penta
Engine Model
MD2A
Engine Type
Engine HP
75
Engine Count
1
Drive Type
Fuel Type
Diesel
Hover over a measurement
IJPE FS LOALWL

Rig & Sails

Rig Type
Masthead Sloop
P (Main Luff)
36.42 ft
E (Main Foot)
13.78 ft
I (Foretriangle Height)
40.68 ft
J (Foretriangle Base)
14.11 ft
Forestay Length (est)
43.06 ft
Main Sail Area
250.93 sqft
Foretriangle Sail Area
287 sqft
Total Sail Area (Reported)
624 sqft
Total Sail Area (Calc)
537.93 sqft

Dimensions

LOA
36.42 ft
LWL
29.53 ft
Beam
11 ft
Draft
4.43 ft
Max Headroom
-
Air Draft
-

Calculations

Hull Speed
7.28 kn
Pounds per Inch Immersion
1